104
OTHER RECORDING FUNCTIONS
Assigning Functions to the [] and []
Keys
A “key customization” feature lets you configure the []
and [] keys so they change camera settings whenever
they are pressed in a REC mode. After you configure the
[] and [] keys, you can change the setting assigned to
them without going through the menu screen.
1.
In a REC mode, press [MENU].
2.
Select the “REC” tab, select “L/R Key”, and
then press [].
3.
Use [] and [] to select the setting you
want, and then press [SET].
• After you assign a function, you can change its
setting simply by pressing the [] and [] keys.
— REC Mode (page 48)
— EV Shift (page 76)
— White Balance (page 78)
— ISO (page 100)
— Self-timer (page 63)
— Off: No function assigned
IMPORTANT!
• Selecting one of the following settings causes the
icon and its Icon Help text to appear momentarily on
the monitor screen. The icon and text disappear after
a short while.
— Flash mode (Auto) icon (page 59)
— Focus mode (Auto Focus) icon (page 69)
— White balance (Auto) icon (page 78)
To Next Page
Loading...
Need help?
General
