71
OTHER RECORDING FUNCTIONS
Using the Macro Mode
Use the Macro mode when you need to focus on close up
subjects. The following shows the approximate focus range
in the Macro mode.
Range: 6cm to 50cm (2.4˝ to 19.7˝)
1.
Press [] ( ) to cycle through the focus
mode settings until “ ” is shown as the
focus mode indicator.
2.
Record the image.
• The focus and image recording operations are
identical to those in the Auto Focus mode.
NOTE
• When the Macro mode cannot focus properly
because the subject is too far away, the camera
automatically switches to the Auto Focus range
(page 69).
• Whenever you perform an optical zoom operation
(page 55) while recording with the Macro mode, a
value will appear on the monitor screen as shown
below to tell you the focusing range.
Example: 10cm - 50cm
• Spot • Multi
Focus frameFocus frame
To Next Page
Loading...
Need help?
General
