GETTING READY
39
• Use the AC adaptor where it will not be
splashed with water. Water creates the risk of
fire and electric shock.
• Do not place a vase or any other container
filled with liquid on top of the AC adaptor.
Water creates the risk of fire and electric
shock.
• Make sure you always remove the camera from the USB
cradle before connecting or disconnecting the AC
adaptor.
• Charging, USB data communication, and using the Photo
Stand feature can cause the AC adaptor to become
warm. This is normal and does not indicate malfunction.
• Unplug the AC power cord from the power outlet
whenever you are not using it.
• Never place a blanket or any other cover on the AC
adaptor. Doing so creates the risk of fire.
Caution!
Turning the Camera On and Off
■ To turn on the camera
Press the power button, [ ] (REC), or [ ] (PLAY). This
will cause the green operation lamp to light momentarily,
and then power will turn on. The mode the camera enters
depends on which button you pressed to turn it on.
Press this button to turn on the camera:
Power button or [ ] (REC)
[
] (PLAY)
To enter this mode at
startup:
REC
PLAY
Power button
Green operation lamp
[ ] (PLAY)
[ ] (REC)
To Next Page
Loading...
Need help?
General
