EN-74
Editing Events
Use the procedures in this section to change the value
of a parameter or to copy a parameter.
1.
On the EVENT EDIT screen, select the event
whose settings you want to change.
• For information about how to select an event, see “To
select an event for editing” (page EN-73).
2.
Touch the parameter you want to change.
• Up and down arrows ( ) indicate that a parameter
can be configured.
3.
Use the 9 w/NO, q/YES buttons to
change parameter values as desired.
• To change a setting value in increments of 10, hold
down the 9 w/NO or q/YES button as you rotate
the bp VALUE dial.
• During note event editing, you can change the pitch
of a note by pressing a keyboard key.
• If velocity is selected, the velocity value is changed
along with the note pitch.
• With the pattern sequencer, the final event (End)
cannot be changed.
1.
On the EVENT EDIT screen, select the event
immediately after the location where you want
to insert an event.
• For information about how to select an event, see “To
select an event for editing” (page EN-73).
2.
Touch “Insert”.
• Touching “Insert” while editing an event of a pad
that is assigned chords causes a chord event to be
inserted. Proceed to step 4.
3.
Touch the event type you want to insert.
This inserts the selected event.
4.
Touch a parameter and then use the 9 w/
NO, q/YES buttons to change its value.
1.
On the EVENT EDIT screen, select the event
you want to copy.
• For information about how to select an event, see “To
select an event for editing” (page EN-73) or “To select
multiple events” (page EN-73).
2.
Touch “Copy”.
• To cancel the copy operation, touch “Copy” again.
3.
Use the operation buttons to select the event
that comes immediately after the position
where you want to insert the copied event.
• You can also touch “Measure”, “Beat” or “Tick” at
the bottom of the screen, and then use the 9 w/NO,
q/YES buttons to specify the insert position.
4.
Touch “Paste”.
This pastes a copy of the event.
Editing an Existing Event
To change event settings
To insert an event
To copy an event
To Next Page
Loading...
Need help?
General
Weight and Dimensions
