54
Advanced features
Other character settings
You can also set clerk names and receipt messages.
Setting receipt message
There are ve lines for receipt message as shown below.
YOUR RECEIPT
THANK YOU
CALL AGAIN
01−21−2015 15:17
4
3
2
1
5
1 Line No.1
2 Line No.2
3 Line No.3
4 Line No.4
5 Line No.5
You can set message line by line.
Sample Operation
Line No. 1
CASIO
Programming to print
CASIO
on top of the receipt.
Step Operation
1 Turn the Mode switch to PGM position and press X and
o keys to make the Register in the program mode.
Xo
2 Enter the message number (in this example 1), and press
u key. The Register is set to program the rst line of the
receipt message.
Zu
3 Input message of the rst line.
In this example,
CASIO
.
h <<< ' <
ZZZZ VVV
<S> <I>
NNN
<O>
4 Press p key to set the message of the rst line. If you
wish to set another line, repeat steps 2 through 4.
p
5 Press o key to complete the setting.
o
To Next Page
Loading...
Need help?
General
