85
Appendix
Appendix
Error code
Error code Guidance on the display Cause Solution
E001 Wrong mode Mode switch position has been
changed before nalization.
Return the Mode switch to its original
setting and nalize the operation.
E008 Please sign on Registration without entering a clerk
number.
Input a clerk number.
E010 Close the platen arm Platen arm is not closed. Close the platen arm rmly.
E014 Paper end There is no paper. Insert paper.
E029 In the tender operation Item registration is prohibited while
partial tendering.
Finalize the transaction.
E046 REG buffer full Register buffer is full. Finalize the transaction.
E081 EJ Full Electronic journal memory is full. Print reset (Z) report of electronic
journal.
E090 Totals remain in the memory Totals not cleared at the end of the
day.
Perform reset (Z) reporting.
E100 Insert SD No SD card is inserted. Insert an SD card.
E101 Illegal Format SD card is not formatted correctly. Format the SD card.
E102 File not found There is no relevant le in the SD
card.
Create the le in the SD card.
E103 SD memory full No space in the SD card. Create space in the SD card.
E104 Check the write protect
switch
Write protect switch of the SD card
is on.
Turn the write protect switch off.
E109 SD card Error End SD card error Format or replace the SD card.
E139 Negative balance is not
allowed
The result of the transaction is
minus.
Register properly
To Next Page
Loading...
Need help?
General
