R-131
QT-6600 Reference Manual
3-7. Auto-programming function
Using the auto programming function makes it possible to save and load the terminal
program files. Methods available for saving the terminal program are as follows:
1) Saving onto another terminal connected through inline.
2) Saving onto a personal computer connected through inline/ online.
3) Saving onto a CF card inserted in the CF card slot.
To ensure quick recovery from a corrupted file resulting from user error or system failure,
it is recommended that you maintain back up copies of current terminal programs on a file
basis.
Terminal program files can be loaded using procedures opposite to those used for saving.
Note:
Data except for program data, such as data in totalizers, counters, and work area, cannot
be saved by the auto programming function. (except for copying all data)
Caution:
Do not remove a CF card during sending / receiving data from/to it.
3-7-1. Auto-programming functions
The QT-6600 terminal is capable of saving and loading terminal program files. The
terminal program file has the following transfer functions:
1) Copy all terminal files (send / receive)
(send: activation by source terminal / receive: activation by target terminal)
This function copies all terminal files with counters and totalizers. When a file is not
reserved on the target terminal, that file is created automatically.
2) Copy all terminal program files (send / receive)
This function copies all terminal files without counters and totalizers. When a file is not
reserved on the target terminal, the processing for that file is skipped.
3) Copy individual terminal program files (send / receive)
This function copies the specific terminal program file (except system work files)
without counters and totalizers.
4) Copy unit price field of particular files (send / receive)
This function copies the unit price field of specific files (i.e. PLU, PLU 2nd@).
To Next Page
Loading...
Need help?
General
