R-41
QT-6600 Reference Manual
Memory allocation of files required when remote printers are connected
• Printer buffer (file 035)
(Reallocate these files, if the file sizes are not enough.)
Other setting
• General machine features
2-3-3. Remote printer output control
The following print items are controlled by programming.
• 0 to 9 line feed above and below printing (only for “order”)
• Dashed line print control (only for “order”)
• Paper auto cut
• Data communication speed (only for RS-232C printer)
• Backup remote printer specification
• Print color (normal / reverse or black / red) control: included in the item programming
(only for “order”)
• Output remote logical order number: included in the item programming
(only for “order”)
• Remote printer output in training mode (only for “order”)
• Item amount printing (only for “order”)
• Alert when remote printer is down
2-3-4. Remote printer backup processes
Remote printer error or terminal with remote printer error
In case of the backup printer is assigned, when the terminal which sends printing data to
remote printer detects the remote printer or the terminal with remote printer abnormality,
the remote printer cross backup (see the next section) is made. In case of no backup printer
is assigned or the backup printer is also downed, the data will be able to display on the
screen.
Remote printer cross backup
When there is more than one remote printer in the system, a setting can be made to enable
remote printer cross backup.
Cross backup (example):
Remote printer 1 backup → Remote printer 2
Remote printer 2 backup → Remote printer 1
or
Remote printer 1 with terminal 1 backup → Remote printer 2 with terminal 2
Remote printer 2 with terminal 2 backup → Remote printer 3 with terminal 1
Note that remote printer backup extends a single level only. If remote printer 1 goes down
in the above example, remote printer 2 performs backup printing. If remote printer 2 now
goes down, remote printer 3 does not take over backup printing.
To Next Page
Loading...
Need help?
General
