Using Tide Graph
Tide Graph a color display Tide Graph Screen (left), a color display Fishing
Time Screen (center), and a monochrome display (right).
●
The Tide Graph Screen shows the current tide level and time (red
characters in the center of the screen), along with the high tide (High) and
the low tide (Low) that will occur up to 12 hours later. The graph shows
changes in
the tide level for 24 hours (12 hours before and after the current
time).
●
The number of white fish marks on the Fishing Time Screen indicates the
projected probability of fishing success. Anywhere from zero to four white
fish marks are displayed, and more white fish marks indicate that better
success can be expected. Note however, that this in no way specifically
guarantees your fishing success.
●
The monochrome display alternates at 10-second intervals between high
tide time (HIGH) and low tide time (LOW).
Before Using Tide Graph
●
To use the Tide Graph Screen, you need to specify the point (port) whose
tide
information you want to view. After reading “Common Outdoor Function
Settings”, perform the operation under “Port setting”.
●
The information
the watch displays on the Fishing Time Screen is calculated
based on your current location. It is not affected by the watch’s point (port)
setting. This means that Fishing Time Screen information can be used for
both saltwater and fresh water fishing.
●
Keep in mind that the Tide Graph Screen shows information about the
currently selected point (port), while Fishing Time Screen information is
based on your current location.
EN-34
To Next Page
Loading...
Need help?
General
