Setting Item List
The setting items displayed on the setting menu (see “Basic Operations for
Configuring
Common
Settings”) are shown below. After displaying the setting
menu, perform the operation required for the item whose setting you want to
change.
Note
●
The letters to the right of each setting item indicate the screen from which
the setting
item can be displayed. For example, the letters “WF” to the right
of a setting item means that the setting item can be displayed from a watch
face (WF) screen.
WF: Watch face MS: MOMENT SETTER app
TL: TOOL app LM:
Location Memory app
*1
AC: Activity app TP: Timepiece app
*1 WSD-F20/WSD-F20S only
Compass Calibration (WF)
Operation
Tap this setting item and then move the watch around as instructed by the
Compass magnetic calibration message and animation that appears on the
display. A
message will appear to let you know when magnetic calibration is
complete, and then the screen that was displayed before you started
calibration (watch face) will reappear.
Description
This function calibrates Compass so it indicates direction correctly.
If Compass Calibration is dimmed (and will not respond when tapped) it
means
that
Compass accuracy is sufficient and that correction is not required.
Compass Magnetic Declination Calibration (WF/TL)
Operation
Each tap of this setting item toggles between “ON” and
“OFF”. The Compass
indicates true north when on, and magnetic north when off.
Description
This function corrects magnetic north and true north error.
EN-46
To Next Page
Loading...
Need help?
General
