Description
This item is for configuring settings related to the Activity app and the Location
Memory app. It is for downloading a map to watch memory when
“Mapbox”
is selected for “Map Type
”. If you want to use the map in an area where a
network connection is not available, use this item beforehand in an area
where a network connection is available to download the desired map.
Downloaded Map (AC/MS/LM)
Operation
Tapping this setting displays the map you downloaded.
Description
Use this operation to check the map area and skin downloaded to the watch
with the “Download Map
” operation.
Route Tracking(Activity) (AC/LM)
Operation
Each
tap of this setting item toggles between “Accuracy Priority”
and “Battery
Priority”.
Description
This item is for configuring a setting related to Activity app. While “Accuracy
Priority” is selected, the GPS positioning operation is performed more
frequently,
and
the route tracked on the map is more accurate. While “Battery
Priority” is selected, the accuracy of the route tracked on the map is reduced
somewhat, but battery power is saved.
Except when you want to perform long-term Trekking or Fishing
measurement operations, use “Accuracy Priority
” for better speed and
distance calculation accuracy.
Important!
●
Note that with Activity app Cycling, Paddle
*1
, and Snow
*1
measurement
operations, GPS positioning is executed at relatively short intervals even
when “Battery Priority” is selected for this setting. Because of this, battery
power savings are less in this case.
*1 WSD-F20/WSD-F20S only
EN-57
To Next Page
Loading...
Need help?
General
