21
2. Choose one option to save the method:
a. Press the DISCOVER key, highlight “Save” and press the ENTER key.
b. Press the Start key after a new method has been created.
3. A new screen will appear. Use the ARROW and “+/-” keys to highlight the first letter or number of the desired
method name.
NOTE: “Shift” changes the letters and/or symbols to lowercase.
4. Press the ENTER key to accept the first letter.
5. Continue highlighting the letters or numbers of the name and pressing the ENTER key for each letter/number until
the name is displayed on the screen.
6. Once the method name has been entered, use the ARROW and “+/-” keys to highlight “OK.” The method will be
saved to the current user’s database.
Load Method
The Load Method option gives the user the ability to recall a method previously saved under their user profile or that of
another user saved on the same Discover SP-D Clinical System. Methods can also be transferred from one system to
another using the USB flash drive supplied with the Discover SP.
1. With the main menu displayed, press the DISCOVER key.
19
2. Using the ARROWS and “+/-” keys, highlight “Load”.
3. Press the ENTER key.
4. The current user’s methods will be displayed. Use the “+/-” keys to highlight the desired method to load into the
system.
5. Press the ENTER key to load the method.
NOTE: To load a method stored for another user:
1. Use the “+/-” keys to highlight the user’s name.
2. Once the user name is highlighted, press the ENTER key.
3. Use the “+/-” keys to highlight the desired method.
4. Press the ENTER key to load the method.
NOTE: The method can be saved in the user’s folder by using the “Save” feature.
To Next Page
Loading...
Need help?
General
