Instrument Panel
60
Transmission Range
indicator, Odometer, and
Digital Clock
The left upper corner will display the
current transmission range .
The right upper corner will display the
clock, fuel consumption per 100 km, and
the trip odometer (switchable). The clock
time can be displayed by means of two
methods: pointer type and digital type.
The right lower corner will display the
total mileage. If the vehicle is quipped
with backup radar, the left lower corner
will display the distance between the
vehicle and the object at the rear of the
vehicle when shifted to the rear gear.
The adjustment method
of clock is as follows:
Under the clock display status, the clock
can be adjusted by pressing and holding
the clock adjustment button on the
speedometer. Press the adjustment button
to adjust when the hour display is
flashing. At the finish of hour adjustment,
the minute display will flash after several
seconds. At that time, press adjustment
button to adjust. At the finish of the
adjustment, it will exit the clock
adjustment status after several seconds.
The switch method
between the clock, fuel
consumption per 100 km
and the trip odometer is
as follows:
When the ignition switch is at ON, it can
switch the display between clock, fuel
consumption per 100 km and the trip
odometer by pressing the clock
adjustment button on the speedometer.
Under the display status of trip odometer ,
the single journey mileage can be reset
by pressing and holding the clock
adjustment button.
To Next Page
Loading...
Need help?
General
