Seat and Safety Protection
81
external side of the headrest guiding
element and at the same time pull out the
headrest from the guiding element.
During the assembling of the headrest,
firstly distinguish the front/rear seat
headrest (the front seat headrest is bigger
than the rear seat headrest) and then push
the headrest pin into the guiding element,
till the spring clip on the guiding element
engages with the pin correctly.
Rear Headrest
The adjustment method of rear headrest
is same with the one of front headrest.
Notice: Do not remove the
headrest or adjust it to the
excessive low position so as to avoid
the neck damage due to lacking of
support to the head during the
collision. It should adjust the
headrest to the proper position.
Front Row Seat Armrest
As shown in the figure, the armrest of
front row seat can be let down from the
seat side so as to promote the comfort.
Middle Row Seat
Seat Fore-and-After Slide
Adjustment
As shown in the figure, pull upward the
adjustment lever located at the seat
external front edge to move the seat
fore-and-after. The adjustment method is
same with the one of front row seat
fore-and-after slide.
Seat
Fore-and-After
Adjustment
Leve
To Next Page
Loading...
Need help?
General
