Turn SignaVMultifunction Lever
I
The lever on the left side of the steering column
includes the following:
Turn and Lane-Change Signals
Headlamp High/Low-Beam Changer
Flash-to-Pass
For information on the exterior lamps, see
Exterior
Lamps
on
page
3-12
later in this section.
Turn
and Lane-Change Signals
The turn signal has two upward (for right) and two
downward (for left) positions. These positions allow you
to
signal a turn or a lane change.
To
signal a turn, move
the
lever all the way up or
down. When the turn is finished, the lever will return
automatically.
r-
An arrow on the instrument
panel cluster will flash in
the direction of the
turn or lane change.
To signal a lane change, just raise or lower the lever
until the arrow starts to flash. Hold it there until you
complete your lane change. The lever will return by itself
when you release
it.
A warning chime signal will come on
if
you have left
your turn signal on for more than
314
mile
(1
km).
As you signal a turn or
a
lane change,
if
the arrows
flash rapidly, a signal bulb may be burned out and other
drivers won’t see your turn signal.
To Next Page
Loading...
Need help?
General
