When choosing a child restraint, be sure the child
restraint is designed to be used in a vehicle.
If
it is,
it will have a label saying that
it
meets federal motor
vehicle safety standards.
Then follow the instructions for the restraint. You may
find these instructions on the restraint itself or in a
booklet, or both. These restraints use the belt system in
your vehicle, but the child also has to be secured
within the restraint to help reduce the chance of personal
injury. When securing an add-on child restraint, refer
to the instructions that come with the restraint which may
be on the restraint itself or
in
a booklet, or both, and
to this manual. The child restraint instructions are
important,
so
if
they are not available, obtain a
replacement copy from the manufacturer.
Where to Put the Restraint
Accident statistics show that children are safer
if
they
are restrained in the rear rather than the front seat.
General Motors, therefore, recommends that child
restraints be secured in a rear seat, including an infant
riding in a rear-facing infant seat, a child riding in a
forward-facing child seat and an older child riding in a
booster seat.
Never
put a rear-facing child restraint
in the front passenger seat. Here’s why:
I
A
child in a rear-facing child restraint can be
seriously injured or killed
if
the right front
passenger’s air bag inflates. This
is
because
the back of the rear-facing child restraint
would be very close to the inflating air bag.
Always secure a rear-facing child restraint
in
a rear seat.
CAUTION: (Continued)
1
-40