Fuel System Inspection
Inspect the complete fuel system for damage or leaks.
Engine Cooling System Inspection
Inspect the hoses and have them replaced
if
they
are cracked, swollen or deteriorated. Inspect all pipes,
fittings and clamps; replace as needed. Clean the
outside of the radiator and air conditioning condenser.
To
help ensure proper operation, a pressure test of
the cooling system and pressure cap is recommended
at least once a year.
Throttle System Inspection
Inspect the throttle system for interference or binding,
and for damaged or missing parts. Replace parts
as needed. Replace any components that have high
effort or excessive wear.
Do
not lubricate accelerator
and cruise control cables.
Brake System Inspection
Inspect the complete system. Inspect brake lines and
hoses for proper hook-up, binding, leaks, cracks,
chafing, etc. Inspect disc brake pads for wear and rotors
for surface condition.
Also
inspect drum brake linings
for wear and cracks. Inspect other brake parts, including
drums, wheei cyiinders, caiipers, parking brake, etc.
The parking brake is self-adjusting and no manual
adjustment
is
required. You may need to have your
brakes inspected more often
if
your driving habits
or conditions result in frequent braking.
6-2
1
To Next Page
Loading...
Need help?
General
