Windshield Washer Fluid
What to
Use
When you need windshield washer fluid, be sure to
read the manufacturer’s instructions before use.
If
you
will
be operating your vehicle
in
an area where the
temperature may fall below freezing, use a fluid that has
sufficient protection against freezing.
Adding
Washer
Fluid
L
The windshield washer
fluid reservoir is located
on the driver’s side of the
engine compartment.
See
Engine Compartment
Overview
on page
5-
12
for
reservoir location.
Open the cap with the washer symbol on it. Add washer
fluid until the tank
is
full.
Notice:
When using concentrated washer fluid, follow the
manufacturer’s instructions for adding water.
Don’t mix water with ready-to-use washer fluid.
Water can cause the solution
to
freeze and
damage your washer fluid tank and other parts of
the washer system.
Also, water doesn’t clean as
well as washer fluid.
Fill your washer fluid tank only three-quarters full
when it’s very cold. This allows for expansion if
freezing occurs, which could damage the tank
if
it
is completely full.
Don’t use engine coolant (antifreeze) in your
windshield washer.
It
can damage your washer
system and paint.
5-33
To Next Page
Loading...
Need help?
General
