Cisco 6800 Series Provisioning Guide

(configures) the phone. Service providers can authorize VARs or advanced users to manually provision the
phone by using the phone keypad. You can also configure provisioning using the Phone Web UI.
Check the Status > Phone Status > Provisioning from the Phone LCD UI, or Provisioning Status in the
Status tab of the web-based Configuration Utility.
Related Topics
Manually Provision a Phone from the Keypad, on page 9
Manually Provision a Phone from the Keypad
Procedure
Step 1
Press Applications .
Step 2
Select Device administration > Profile Rule.
Step 3
Enter the profile rule using the following format:
protocol://server[:port]/profile_pathname
For example:
tftp://192.168.1.5/CP_x8xx_MPP.cfg
If no protocol is specified, TFTP is assumed. If no server-name is specified, the host that requests the URL
is used as the server name. If no port is specified, the default port is used (69 for TFTP, 80 for HTTP, or 443
for HTTPS).
Step 4
Press Resync.
Related Topics
Phone Provisioning Practices, on page 8
Cisco IP Phone 6800 Series Multiplatform Phones Provisioning Guide
9
Deployment and Provisioning
Manually Provision a Phone from the Keypad

Cisco 6800 Series Specifications

General

Brand	Cisco
Model	6800 Series
Category	IP Phone
Language	English