Cisco 6800 Series Provisioning Guide

Data Types
These data types are used with configuration profile parameters:
• {a,b,c,…}—A choice among a, b, c, …
• Bool—Boolean value of either “yes” or “no.”
• CadScript—A miniscript that specifies the cadence parameters of a signal. Up to 127 characters.
Syntax: S
1
[;S
2
], where:
◦
S
i
=D
i
(on
i,1
/off
i,1
[,on
i,2
/off
i,2
[,on
i,3
/off
i,3
[,on
i,4
/off
i,4
[,on
i,5
/off
i,5
[,on
i,6
/off
i,6
]]]]]) and is known as a
section.
◦
on
i,j
and off
i,j
are the on/off duration in seconds of a segment. i = 1 or 2, and j = 1 to 6.
◦
D
i
is the total duration of the section in seconds.
All durations can have up to three decimal places to provide 1 ms resolution. The wildcard character “*”
stands for infinite duration. The segments within a section are played in order and repeated until the
total duration is played.
Example 1:
60(2/4)
Number of Cadence Sections = 1
Cadence Section 1: Section Length = 60 s
Number of Segments = 1
Segment 1: On=2s, Off=4s
Total Ring Length = 60s
Example 2—Distinctive ring (short,short,short,long):
60(.2/.2,.2/.2,.2/.2,1/4)
Number of Cadence Sections = 1
Cadence Section 1: Section Length = 60s
Number of Segments = 4
Segment 1: On=0.2s, Off=0.2s
Segment 2: On=0.2s, Off=0.2s
Segment 3: On=0.2s, Off=0.2s
Segment 4: On=1.0s, Off=4.0s
Total Ring Length = 60s
• DialPlanScript—Scripting syntax that is used to specify Line 1 and Line 2 dial plans.
• Float<n>—A floating point value with up to n decimal places.
• FQDN—Fully Qualified Domain Name. It can contain up to 63 characters. Examples are as follows:
•
sip.Cisco.com:5060 or 109.12.14.12:12345
•
sip.Cisco.com or 109.12.14.12
• FreqScript—A miniscript that specifics the frequency and level parameters of a tone. Contains up to
127 characters.
Cisco IP Phone 6800 Series Multiplatform Phones Provisioning Guide
28
Provisioning Scripts
Data Types

Cisco 6800 Series Specifications

General

Brand	Cisco
Model	6800 Series
Category	IP Phone
Language	English