Cisco 6800 Series Provisioning Guide

Description and Default ValueParameter Name
Syslog message issued after a firmware upgrade attempt completes
successfully.
The default value is $PN $MAC -- Successful upgrade
$SCHEME://$SERVIP:$PORT$PATH -- $ERR
Log Upgrade Success Msg
Syslog message issued after a failed firmware upgrade attempt.
The default value is $PN $MAC -- Upgrade failed: $ERR
Log Upgrade Failure Msg
General Purpose Parameters
The following table defines the function and usage of each parameter in the General Purpose Parameters
section of the Provisioning tab.
Description and Default ValueParameter Name
The general purpose parameters GPP_* are used as free string registers
when configuring the phones to interact with a particular provisioning
server solution. They can be configured to contain diverse values,
including the following:
•
Encryption keys.
•
URLs.
•
Multistage provisioning status information.
•
Post request templates.
•
Parameter name alias maps.
•
Partial string values, eventually combined into complete parameter
values.
The default value is blank.
GPP A - GPP P
Macro Expansion Variables
Certain macro variables are recognized within the following provisioning parameters:
•
Profile_Rule
•
Profile_Rule_*
•
Resync_Trigger_*
•
Upgrade_Rule
•
Log_*
Cisco IP Phone 6800 Series Multiplatform Phones Provisioning Guide
67
Provisioning Parameters
General Purpose Parameters

Cisco 6800 Series Specifications

General

Brand	Cisco
Model	6800 Series
Category	IP Phone
Language	English