Cisco 6800 Series Provisioning Guide

CHAPTER 5
Provisioning Parameters
•
Provisioning Parameters Overview, page 63
•
Configuration Profile Parameters, page 63
•
Firmware Upgrade Parameters, page 66
•
General Purpose Parameters, page 67
•
Macro Expansion Variables, page 67
•
Internal Error Codes, page 70
Provisioning Parameters Overview
This chapter describes the provisioning parameters that can be used in configuration profile scripts.
Configuration Profile Parameters
The following table defines the function and usage of each parameter in the Configuration Profile Parameters
section under the Provisioning tab.
Description and Default ValueParameter Name
Controls all resync actions independently of firmware upgrade actions. Set to
Yes to enable remote provisioning.
The default value is Yes.
Provision Enable
Triggers a resync after every reboot except for reboots caused by parameter
updates and firmware upgrades.
The default value is Yes.
Resync On Reset
Cisco IP Phone 6800 Series Multiplatform Phones Provisioning Guide
63

Cisco 6800 Series Specifications

General

Brand	Cisco
Model	6800 Series
Category	IP Phone
Language	English