Procedure
Step 1
On the Configuration Utility page, select Admin Login > advanced > Voice > Provisioning.
Step 2
In the Configuration Profile section, choose Yes from the Provision Enable drop-down list box.
Step 3
Enter the parameters.
Step 4
Click Submit All Changes.
Related Topics
Profile Updates and Firmware Upgrades, on page 31
Allow and Configure Firmware Upgrades
Firmware updates can be allowed at specified intervals. Updated firmware is sent from a server to the phone
by using TFTP or HTTP. Security is less of an issue with a firmware upgrade, because firmware does not
contain personal information.
Procedure
Step 1
On the Configuration Utility page, select Admin Login > advanced > Voice > Provisioning.
Step 2
In the Firmware Upgrade section, choose Yes from the Upgrade Enable drop-down list box.
Step 3
Enter the parameters.
Step 4
Click Submit All Changes.
Upgrade Firmware by TFTP, HTTP, or HTTPS
The phone supports single one image upgrade by TFTP, HTTP, or HTTPS.
Downgrades to earlier releases may not be available for all devices. For more information, see the release
notes for your phone and firmware version.
Note
Before You Begin
The firmware load file must be downloaded to an accessible server.
Procedure
Step 1
Rename the image as follows:
where:
Cisco IP Phone 6800 Series Multiplatform Phones Provisioning Guide
32
Provisioning Scripts
Allow and Configure Firmware Upgrades
To Next Page
Loading...
Need help?
General
