Cisco 7841 Administration Guide

• name is the name of the speed dial being configured
The name field displays on the softkey on the IP phone screen. We recommend a maximum of 10
characters for a phone. If more characters are used, the label might be truncated on the phone screen.
Note
Step 4 Edit the following:
• Idle Key List: Edit the field as described in the following example:
redial|1;newcall|2;dnd;psk1
If the user incorrectly configures the programmable softkey list features on the phone, the key list on the
phone LCD does not update. For example:
• If a user enters rdeial;newcall;cfwd (redial has been misspelt), the key list is not updated
and the user does not see any change on the LCD.
• If a user enters redial;newcall;cfwd;delchar, the user will not see a change on the LCD,
as the delchar softkey is not allowed in the Idle Key List. Hence, this is an incorrect configuration
of the programmable softkey list.
• PSK1:
fnc=sd;ext=5014@$PROXY;nme=sktest1
In this example, we are configuring a softkey on a phone as a speed dial number for extension 5014
(sktest1).
Note
You can also configure an XML service on the programmable soft key. Enter the string in this format:
fnc=xml;url=http://xml.service.url;nme=name
Step 5 Click Submit All Changes.
Programmable Softkeys
Available Phone StatusDefinitionKey LabelKeyword
IdleLogs user in to Automatic Call
Distribution (ACD).
Agt signinacd_login
IdleLogs user out of ACD.AgtSignOutacd_logout
RingingAnswers an incoming call.Answeranswer
IdleChecks the ACD status.Agt Statusastate
IdleDenotes that a user who is logged in to
an ACD server has set his status as
available.
Availavail
Shared-Active, Shared-HeldAllows another user to interrupt a shared
call.
Bargebarge
Cisco IP Phone 7800 Series Multiplatform Phones Administration Guide
174
Cisco IP Phone Administration
Programmable Softkeys

Cisco 7841 Specifications

General

Brand	Cisco
Model	7841
Category	IP Phone
Language	English