Cisco 7911G - IP Phone VoIP User Manual

4-19
Cisco Unified IP Phone 7906G and 7911G for Cisco Unified Communications Manager 6.0
OL11954-01
Chapter 4 Configuring Settings on the Cisco Unified IP Phone
Device Configuration Menu
Enable VAD Displays if voice activation detection
(VAD) is enabled.
From Cisco Unified
Communications Manager
Administration, choose Device >
Device Settings > SIP Profile.
Start Media Port Displays the start Real-Time Transport
Protocol (RTP) range for media.
From Cisco Unified
Communications Manager
Administration, choose Device >
Device Settings > SIP Profile.
End Media Port Displays the end Real-Time Transport
Protocol (RTP) range for media.
From Cisco Unified
Communications Manager
Administration, choose Device >
Device Settings > SIP Profile.
Backup Proxy Displays the IP address of the backup
proxy server or gateway.
Display only—cannot configure.
Backup Proxy Port Displays the port number of the backup
proxy server or gateway.
Display only—cannot configure.
Emergency Proxy Displays the IP address of the emergency
proxy server or gateway.
Display only—cannot configure.
Emergency Proxy Port Displays the port number of the
emergency proxy server or gateway.
Display only—cannot configure.
Outbound Proxy Displays the IP address of the outbound
proxy server.
Display only—cannot configure.
Outbound Proxy Port Displays the port number of the
outbound proxy server.
Display only—cannot configure.
NAT Enabled Displays if Network Address Translation
(NAT) is enabled.
Display only—cannot configure.
NAT Address Displays the WAN IP address of the NAT
or firewall server.
Display only—cannot configure.
Call Statistics Displays if call statistics are enabled on
the phone.
From Cisco Unified
Communications Manager
Administration, choose Device >
Device Settings > SIP Profile.
Table 4-5 SIP General Configuration Menu Options (continued)
Option Description To Change

Cisco 7911G - IP Phone VoIP Specifications

General

Brand	Cisco
Model	7911G - IP Phone VoIP
Category	IP Phone
Language	English