8-3
Cisco Unified IP Phone 7906G and 7911G for Cisco Unified Communications Manager 6.0
OL11954-01
Chapter 8 Monitoring the Cisco Unified IP Phone Remotely
Accessing the Web Page for a Phone
• Network Statistics—Includes the following hyperlinks, which provide
information about network traffic:
–
Ethernet Information—Displays information about Ethernet traffic.
For more information, see the “Network Statistics” section on page 8-11.
–
Access—Displays information about network traffic to and from the PC
port on the phone. For more information, see the “Network Statistics”
section on page 8-11.
–
Network—Displays information about network traffic to and from the
network port on the phone. For more information, see the “Network
Statistics” section on page 8-11.
• Device Logs—Includes the following hyperlinks, which provide information
that you can use for troubleshooting:
–
Console Logs—Includes hyperlinks to individual log files. For more
information, see the “Device Logs” section on page 8-14.
–
Core Dumps—Includes hyperlinks to individual dump files.
–
Status Messages—Displays up to the 10 most recent status messages
that the phone has generated since it was last powered up. For more
information, see the “Device Logs” section on page 8-14.
–
Debug Display—Displays messages that might be useful to the Cisco
TAC if you require assistance with troubleshooting. For more
information, see the “Device Logs” section on page 8-14.
• Streaming Statistics—Includes the Stream 1, Stream 2, and Stream 3
hyperlinks, which display a variety of streaming statistics. For more
information, see the “Streaming Statistics” section on page 8-15.