Cisco 7911G - IP Phone VoIP User Manual

4-43
Cisco Unified IP Phone 7906G and 7911G for Cisco Unified Communications Manager 6.0
OL11954-01
Chapter 4 Configuring Settings on the Cisco Unified IP Phone
Security Configuration Menu
802.1X Authentication and Status
Use the options that are described in the following tables to enable 802.1X
authentication and monitor its progress:
• Table 4-20 on page 4-44—802.1X Authentication Settings
• Table 4-21 on page 4-45—802.1X Authentication Real-Time Status
Table 4-19 Trust List Information
Option Description To Change
CAPF Server IP address of the CAPF used by the
phone. Also displays a certificate
icon if a certificate is installed for
this server.
For more information about these
settings, refer to the “Configuring the
Cisco CTL Client” section in Cisco
Unified Communications Manager
Security Guide.
CallManager /
TFPT Server
IP address of
Cisco Unified Communications
Manager and TFTP servers used by the
phone. Also displays a certificate
icon if a certificate is installed for this
server.
For more information about these
settings, refer to the “Configuring the
Cisco CTL Client” section in Cisco
Unified Communications Manager
Security Guide.
SRST Router IP address of the trusted SRST router
that is available to the phone, if such a
device has been configured in
Cisco Unified Communications
Manager Administration. Also displays
a certificate icon if a certificate is
installed for this server.
For more information about these
settings, refer to the “Configuring the
Cisco CTL Client” section in Cisco
Unified Communications Manager
Security Guide.

Cisco 7911G - IP Phone VoIP Specifications

General

Brand	Cisco
Model	7911G - IP Phone VoIP
Category	IP Phone
Language	English