Chapter 4 Configuring Settings on the Cisco Unified IP Phone
Configuration Menus on the Cisco Unified IP Phones 7906G and 7911G
4-2
Cisco Unified IP Phone 7906G and 7911G for Cisco Unified Communications Manager 6.0
OL11954-01
• Device Configuration menu—Provides access to sub-menus from which you
can view a variety of non network-related settings. For more information, see
the “Device Configuration Menu” section on page 4-15.
• Security Configuration menu—Provides options for displaying and
modifying security settings. For more information, see the “Security
Configuration Menu” section on page 4-38
Before you can change option settings on the Network Configuration menu, you
must unlock options for editing. See the “Unlocking and Locking Options”
section on page 4-4 for instructions.
For information about the keys you can use to edit or change option settings, see
the “Editing the Values of an Option Setting” section on page 4-5.
You can control whether a phone user has access to phone settings by using the
Settings Access field in the Cisco Unified Communications Manager
Administration Phone Configuration Settings page. See
Cisco Unified Communications Manager Administration Guide for more
information.
Related Topics
• Unlocking and Locking Options, page 4-4
• Editing the Values of an Option Setting, page 4-5
• Overview of Options Configurable from a Phone, page 4-6
• Network Configuration Menu, page 4-7
• Device Configuration Menu, page 4-15
Displaying a Configuration Menu
To display a configuration menu, perform the following steps.
Note You can control whether a phone has access to the Settings menu or to options on
this menu by using the Settings Access field in the
Cisco Unified Communications Manager Administration Phone Configuration
page. The Settings Access field accepts these values:
• Enabled—Allows access to the Settings menu.
• Disabled—Prevents access to the Settings menu.
To Next Page
Loading...
Need help?
General