Chapter 4 Configuring Settings on the Cisco Unified IP Phone
Security Configuration Menu
4-42
Cisco Unified IP Phone 7906G and 7911G for Cisco Unified Communications Manager 6.0
OL11954-01
Unlocking the CTL File
To unlock the CTL file from the Security Configuration menu, follow these steps:
Procedure
Step 1 Press **# to unlock options on the CTL File screen.
If you decide not to continue, press **# again to lock options on this menu.
Step 2 Highlight the CTL option.
Step 3 Press the Unlock softkey to unlock the CTL file.
After you change and save the TFTP Server 1 or the TFTP Server 2 option, the
CTL file will be locked automatically.
Note When you press the Unlock softkey, it changes to Lock. If you decide not
to change the TFTP Server 1 or TFTP Server 2 option, press the Lock
softkey to lock the CTL file.
Trust List Menu
The Trust List menu displays information about all of the servers that the phone
trusts. Table 4-19 describes the options in this menu.
If a CTL file is installed on the phone, you can access the Trust List menu by
pressing the Applications Menu button and choosing Security Configuration >
Trust List.