Cisco 7911G - IP Phone VoIP User Manual

5-1
Cisco Unified IP Phone 7906G and 7911G for Cisco Unified Communications Manager 6.0
OL11954-01
CHAPTER
5
Configuring Features, Templates,
Services, and Users
After you install Cisco Unified IP Phones in your network, configure their
network settings, and add them to Cisco Unified Communications Manager, you
must use the Cisco Unified Communications Manager Administration application
to configure communications features, optionally modify phone templates, set up
services, and assign users.
This chapter provides an overview of these configuration and setup procedures.
Cisco Unified Communications Manager documentation provides detailed
instructions for these procedures.
For suggestions about how to provide users with information about features, and
what information to provide, see Appendix A, “Providing Information to Users.”
For information about setting up phones in non-English environments, see
Appendix C, “Supporting International Users.”
This chapter includes following topics:
• Telephony Features Available for the Cisco Unified IP Phone, page 5-2
• Configuring Corporate and Personal Directories, page 5-23
• Modifying Phone Button Templates, page 5-24
• Configuring Softkey Templates, page 5-25
• Setting Up Services, page 5-25
• Adding Users to Cisco Unified Communications Manager, page 5-26
• Managing the User Options Web Pages, page 5-27

Cisco 7911G - IP Phone VoIP Specifications

General

Brand	Cisco
Model	7911G - IP Phone VoIP
Category	IP Phone
Language	English