Cisco 7911G - IP Phone VoIP User Manual

Chapter 3 Setting Up the Cisco Unified IP Phone
Configuring Security on the Cisco Unified IP Phone
3-18
Cisco Unified IP Phone 7906G and 7911G for Cisco Unified Communications Manager 6.0
OL11954-01
Before You Begin
Make sure that the appropriate Cisco Unified Communications Manager and the
Certificate Authority Proxy Function (CAPF) security configurations are
complete:
• The CTL file should have a CAPF certificate.
• The CAPF certificate must exist in the C:\Program Files\Cisco\Certificates
folder in every server in the cluster.
• The CAPF is running and configured.
• The phone should have the correct load file. To verify the image, press the
Applications Menu button and choose Settings > Model Information.
Refer to Cisco Unified Communications Manager Security Guide for more
information.
To configure an LSC on the phone, follow these steps:
Procedure
Step 1 Obtain the CAPF authentication code that was set when the CAPF was
configured.
Step 2 From the phone, press the Applications Menu button and choose Settings >
Security Configuration.
Note You can control access to the Settings Menu by using the Settings Access
field in the Cisco Unified Communications Manager Administration
Phone Configuration Settings page. For more information, see
Cisco Unified Communications Manager Administration Guide.
Step 3 Press **# to unlock settings on the Security Configuration menu. (See the
“Unlocking and Locking Options” section on page 4-4 for information using
locking and unlocking options.)
Note If a Settings Menu password has been provisioned, SIP phones present an
“Enter password” prompt after you enter **#.
Step 4 Scroll to LSC and press the Update softkey.

Cisco 7911G - IP Phone VoIP Specifications

General

Brand	Cisco
Model	7911G - IP Phone VoIP
Category	IP Phone
Language	English