Cisco ASR 1002-HX User Manual

Step 5
Tighten the captive installation screws on the crypto module.
Step 6
Replace the access panel and screws.
Step 7
Install the chassis in the rack.
Step 8
Power up the router by plugging in the power supplies and placing the chassis power switch to the On position.
Step 9
Use the show platform hardware crypto-device 0 status command to verify successful installation:
Router# show platform hardware crypto-device 0 status
Encryption processor is functional
Repacking the Router
If your system is damaged, you must repack it for return shipment.
Before you return the router or move the router to a different location, repack the system using the original
packaging material.
Cisco ASR 1001-HX Router and Cisco ASR 1002-HX Router Hardware Installation Guide
144
Removing and Replacing FRUs
Repacking the Router

Cisco ASR 1002-HX Specifications

General

Brand	Cisco
Model	ASR 1002-HX
Category	Network Router
Language	English