Cisco ASR 1002-HX User Manual

The chassis has a front-to-rear airflow. Six internal fans draw cooling air into the chassis and across internal
components to maintain an acceptable operating temperature. The fans are numbered from 0 to 5, right to left.
Two power supplies (AC or DC) are accessed from the rear of the router and are hot-swappable.
The Cisco ASR 1001-HX Router can support two AC or two DC power supplies. Do not install mixed
AC and DC power supply units in the same chassis.
Caution
The following figure shows the rear of the Cisco ASR 1002-HX Router.
Figure 11: Cisco ASR 1002-HX Router Rear View
The chassis has a front-to-rear airflow. Four internal fans draw cooling air in through the front of the chassis
and across internal components to maintain an acceptable operating temperature. The fans are located at the
rear of the chassis. The fans are numbered from 0 to 3, right to left.
The power supplies used in Cisco ASR 1001-HX Router and Cisco ASR 1002-HX Router are different
and they should not be mixed or swapped. The size and structural dimensions are the same, therefore they
both look alike. It would be hazardous if you accidently inserted the wrong power supply into the PEM
slot.
Caution
Cisco Product Identification Standard
This section describes the Cisco products and services product identification standard. This feature provides
you with the ability to effectively integrate and manage Cisco products in your network and business operations.
Cisco ASR 1001-HX Router and Cisco ASR 1002-HX Router Hardware Installation Guide
11
Overview
Cisco Product Identification Standard

Cisco ASR 1002-HX Specifications

General

Brand	Cisco
Model	ASR 1002-HX
Category	Network Router
Language	English