Cisco ASR 1002-HX User Manual

DescriptionComponent
Pointer DocDocumentation
Power cord if an AC power supply was shipped. There are none for the
DC power supply units.
Optional Equipment
Installation Checklist
To assist you with your installation and to provide a historical record of what was done by whom, print or
photocopy the Installation Checklist below. Use this to record when each procedure or verification is completed.
When the checklist is completed, place it in your site log along with the other records for your new router.
Table 13: Installation Checklist
DateVerified ByTask
Date chassis received
Chassis and all accessories unpacked
Types and numbers of interfaces verified
Safety recommendations and guidelines
reviewed
Installation Checklist copied
Site log established and background
information entered
Site power voltages verified
Site environmental specifications verified
Required passwords, IP addresses, device
names, and so on, available
Required tools available
Network connection equipment available
Cable-management brackets installed
(optional, but recommended)
AC power cable(s) connected to AC
source(s) and router
Cisco ASR 1001-HX Router and Cisco ASR 1002-HX Router Hardware Installation Guide
47
Preparing Your Site for Installation
Installation Checklist

Cisco ASR 1002-HX Specifications

General

Brand	Cisco
Model	ASR 1002-HX
Category	Network Router
Language	English