Cisco ASR 1002-HX User Manual

Statement 1005—Circuit Breaker
This product relies on the building's installation for short-circuit (overcurrent) protection. Ensure that the
protective device is rated not greater than:
AC:
Warning
•
20 A U.S. maximum (ASR 1001-HX Router and ASR 1002-HX Router)
DC:
•
20 A U.S. maximum (ASR 1001-HX Router)
•
30 A U.S maximum (ASR 1002-HX Router)
Statement 1045—Short-circuit Protection
This product requires short-circuit (overcurrent) protection to be provided as part of the building installation.
Install only in accordance with national and local wiring regulations.
Warning
Statement 1028—More Than One Power Supply
This unit might have more than one power supply connection. All connections must be removed to
de-energize the unit.
Warning
Statement 1017—Restricted Area
This unit is intended for installation in restricted access areas. A restricted access area can be accessed
only through the use of a special tool, lock and key, or other means of security.
Warning
Statement 1019—Main Disconnecting Device
The plug-socket combination must be accessible at all times, because it serves as the main disconnecting
device.
Warning
Statement 1086—Power Terminals, Replace Cover
Hazardous voltage or energy may be present on power terminals. Always replace cover when terminals
are not in service. Be sure uninsulated conductors are not accessible when covers is in place.
Warning
Statement 1025—Use Copper Conductors Only
Use copper conductors only.
Warning
Cisco ASR 1001-HX Router and Cisco ASR 1002-HX Router Hardware Installation Guide
32
Preparing Your Site for Installation
General Safety Warnings

Cisco ASR 1002-HX Specifications

General

Brand	Cisco
Model	ASR 1002-HX
Category	Network Router
Language	English