ASR 5500
VPC-SI
VPC-DI
Applicable Platform(s)
EnabledFeature Default
Not ApplicableRelated Changes in This Release:
•
ASR 5500 System Administration Guide
•
Command Line Interface Reference
•
VPC-DI System Administration Guide
•
VPC-SI System Administration Guide
Related Documentation
Revision History
Revision history details are not provided for features introduced before releases 21.2 and N5.5.Note
ReleaseRevision Details
21.3Two new critical CLI event logs and two new SNMP Traps are added to provide
notification if an administrator disables logging entirely for an Event ID or Event
ID range, or changes the logging level below default logging level (error level).
These event logs and traps are enabled by default in this release, and cannot be
disabled. Refer to Global Configuration Mode Filtering, on page 130 for more
information.
No commands have been added or modified as a result of this feature.
The show snmp trap statistics command output was expanded to show details in
the event that logging events have been disabled or logging level has been changed
below the default (error) logging level.
Pre 21.2First introduced.
System Log Types
There are five types of logs that can be configured and viewed on the system:
Not all Event Logs can be configured on all products. Configurability depends on the hardware platform
and licenses in use.
Important
ASR 5500 System Administration Guide, StarOS Release 21.5
126
System Logs
System Log Types
To Next Page
Loading...
Need help?
General
