Cisco ASR 903 Guide

Ethernet over MPLS
▀ Ethernet OAM
▄ Cisco ASR 903 Router Design and Deployment Guide
62
OL-30526-01
service instance 200 ethernet evc-200
encapsulation dot1q 200-300
cfm mep domain PE1-2 mpid 1201 ! mpid must be different from remote end
interface pseudowire200
encapsulation mpls
neighbor 10.10.3.3 200
l2vpn xconnect context PW200
member GigabitEthernet0/1/0 service-instance 200
member pseudowire200
Verify OAM
ASR903-PE2# show ethernet cfm maintenance-points local
Local MEPs:
--------------------------------------------------------------------------------
MPID Domain Name Lvl MacAddress Type CC
Ofld Domain Id Dir Port Id
MA Name SrvcInst Source
EVC name
--------------------------------------------------------------------------------
1201 PE1-2 6 7010.5c51.a4bf XCON Y
No PE1-2 Up Gi0/1/0 N/A
EVC-PE-200 200 Static
evc-200
Total Local MEPs: 1
ASR903-PE2# show ethernet cfm maintenance-points remote
--------------------------------------------------------------------------------
MPID Domain Name MacAddress IfSt PtSt
Lvl Domain ID Ingress
RDI MA Name Type Id SrvcInst
EVC Name Age
Local MEP Info
--------------------------------------------------------------------------------
1200 PE1-2 7010.5c51.8fbf Up Up
6 PE1-2 Gi0/1/0:(10.10.3.3, 200)
- EVC-PE-200 XCON N/A 200
evc-200 0s
MPID: 1201 Domain: PE1-2 MA: EVC-PE-200
Total Remote MEPs: 1
ASR903-PE2# ping ethernet mpid 1200 domain PE1-2 service EVC-PE-200 source 1201
Type escape sequence to abort.
Sending 5 Ethernet CFM loopback messages to 7010.5c51.8fbf, timeout is 5
seconds:!!!!!
Success rate is 100 percent (5/5), round-trip min/avg/max = 2/2/4 ms
ASR903-PE2# traceroute ethernet mpid 1200 domain PE1-2 service EVC-PE-200 source
1201
Type escape sequence to abort. TTL 64. Linktrace Timeout is 5 seconds

Cisco ASR 903 Specifications

General

Brand	Cisco
Model	ASR 903
Category	Network Router
Language	English