Cisco ASR 903 Guide

TDM
Structure-Agnostic TDM over Packet (SAToP) ▀
Cisco ASR 903 Router Design and Deployment Guide▄
OL-30526-01
83
negotiation auto
mpls ip
!
interface CEM0/4/0
no ip address
cem 0
xconnect 172.16.2.2 1001 encapsulation mpls
!
!
router ospf 1
router-id 172.16.3.3
network 172.16.3.3 0.0.0.0 area 0
network 10.10.3.0 0.0.0.255 area 0
!
mpls ldp router-id Loopback0 force
!
Verifying TDM PW
ASR903-R2# show xconnect all detail
Legend: XC ST=Xconnect State S1=Segment1 State S2=Segment2 State
UP=Up DN=Down AD=Admin Down IA=Inactive
SB=Standby HS=Hot Standby RV=Recovering NH=No Hardware
XC ST Segment 1 S1 Segment 2 S2
------+---------------------------------+--+---------------------------------+--
UP pri ac CE0/5/0:0(SATOP E1) UP mpls 172.16.3.3:1001 UP
Interworking: L2L Local VC label 24
Remote VC label 22
ASR903-R2# show mpls l2transport vc 1001
Local intf Local circuit Dest address VC ID Status
------------- -------------------------- --------------- ---------- ----------
CE0/5/0 SATOP E1 0 172.16.3.3 1001 UP
ASR903-R2# show mpls l2transport vc 1001 detail
Local interface: CE0/5/0 up, line protocol up, SATOP E1 0 up
Destination address: 172.16.3.3, VC ID: 1001, VC status: up
Output interface: Gi0/2/1, imposed label stack {0 22}
Preferred path: not configured
Default path: active
Next hop: 10.10.3.2
Create time: 01:10:31, last status change time: 00:51:21
Last label FSM state change time: 00:57:43
Signaling protocol: LDP, peer 172.16.3.3:0 up

Cisco ASR 903 Specifications

General

Brand	Cisco
Model	ASR 903
Category	Network Router
Language	English