Cisco ATA 191 User Manual

CHAPTER 3
Configure Features
• Phone Adapter Configuration Utility, on page 13
• Set Up Phone Features with Phone Adapter Configuration Utility, on page 14
• Call Forward Settings, on page 15
• Selective Call Forward Settings, on page 15
• Speed Dial Settings, on page 16
• Supplementary Service Settings, on page 17
• Distinctive Ring Settings, on page 18
• Ring Settings, on page 18
• Log, on page 19
Phone Adapter Configuration Utility
You can configure or customize some phone features with the Phone Adapter Configuration Utility webpage.
Your administrator gives you the page URL, your user ID, and password.
In the Configuration Utility page, you can view some network and administration settings, as well as some
basic information about your ATA, such as firmware version, serial number, and memory use.
Most people use the Phone Adapter Configuration Utility page to set up a few basic features such as Speed
dial or Call forward. To set up these features, refer to the following table.
The following table describes the phone features that you configure from the Phone Adapter Configuration
Utility webpage.
Table 4: Configuration Utility Features
DescriptionFeature
You specify the number that will receive calls when
call forward is enabled on the phone. Use the
Configuration Utility page to set up more complicated
call forward functions, for example, when your line
is busy.
For more information, see Call Forward Settings, on
page 15 or Selective Call Forward Settings, on page
15 and Set Up Phone Features with Phone Adapter
Configuration Utility, on page 14.
Call forward and Selective call forward.
Cisco ATA 191 and ATA 192 Analog Telephone Adapter User Guide for Multiplatform Firmware
13

Cisco ATA 191 Specifications

General

Brand	Cisco
Model	ATA 191
Category	Adapter
Language	English