Cisco ATA 191 User Manual

Before you begin
ATA registers successfully.
Procedure
Step 1 Sign into Phone Adapter Configuration Utility.
Step 2 Select Administration > Log > PRT Viewer.
Step 3 Configure the PRT Upload URL parameter to specify the server to which you want to send the problem
report. For example: http://10.74.133.94:9090.
For more information about the PRT related parameters, see PRT Viewer, on page 21.
Step 4 Click Submit.
PCM Viewer
Use the Administration > Log > PCM Viewer to download and view PCM.
The ATA allows you to capture the PCM log file while a user offhook to start a call.
After making your changes, click Submit to save your settings, or click Cancel to redisplay the page with
the saved settings.
Table 14: Log Viewer Settings
DescriptionField
Enable or disable capture PCM.PCM Capture Enable
Enter the PCM capture duration in seconds. The valid range is 20 to
300.
Duration
List the PCM file which is captured by user.
Click Refresh to refresh the PCM Memory Dump File. Click Download
to download the dump file on your computer.
PCM File List
CSS Dump
Use the Administration > Log > CSS Dump page to set and download CSS dump file.
Cisco ATA 191 and ATA 192 Analog Telephone Adapter User Guide for Multiplatform Firmware
22
Configure Features
PCM Viewer

Cisco ATA 191 Specifications

General

Brand	Cisco
Model	ATA 191
Category	Adapter
Language	English