Cisco ATA 191 User Manual

DescriptionFeature
You assign phone numbers to a line so that you can
quickly call that person.
For more information, see Speed Dial Settings, on
page 16 and Set Up Phone Features with Phone
Adapter Configuration Utility, on page 14
Speed dial.
Configure such features as Call waiting, Do not
disturb, or Called ID.
For more information, see Supplementary Service
Settings, on page 17 and Set Up Phone Features with
Phone Adapter Configuration Utility, on page 14
Supplementary services.
You can assign a specific ring to a phone number or
line.
For more information, see Distinctive Ring Settings,
on page 18 and Set Up Phone Features with Phone
Adapter Configuration Utility, on page 14.
Distinctive ring
You can assign a specific ring to a certain situation
such as when a call is on hold or during a call back.
For more information, see Ring Settings, on page 18
and Set Up Phone Features with Phone Adapter
Configuration Utility, on page 14.
Ring setting
Set Up Phone Features with Phone Adapter Configuration Utility
Use the Phone Adapter Configuration Utility page to set up a few basic features such as Speed dial, Call
forward or Do not disturb.
Before you begin
Before you set up a feature, you should review the corresponding settings page.
Procedure
Step 1 Sign into Phone Adapter Configuration Utility as an user.
Step 2 Select Voice > User
Step 3 Navigate to the feature pane and set the fields.
Step 4 Click Save.
Cisco ATA 191 and ATA 192 Analog Telephone Adapter User Guide for Multiplatform Firmware
14
Configure Features
Set Up Phone Features with Phone Adapter Configuration Utility

Cisco ATA 191 Specifications

General

Brand	Cisco
Model	ATA 191
Category	Adapter
Language	English