Cisco ATA 191 User Manual

Answer a call on your ATA phone
Your analogue phone (ATA) works just like a Cisco IP phone.
Procedure
When your analog phone rings, pick up the handset to answer the call.
Answer call waiting on your ATA phone
When you're on an active call, you know that a call is waiting when you hear a single beep.
Procedure
Step 1 Perform a hook flash to speak with another caller who is calling you.
You connect to the second caller and put the first caller on hold.
Step 2 (Optional) To speak with the first caller, perform a hook flash again.
Subsequent hook flashes toggle you between the two callers. You can't create a conference this way.
Put a call on hold on your analog phone
You can put an active call on hold and then resume the call when you're ready.
Procedure
Step 1 While on an active call, perform a hook flash.
Step 2 To return to the call, either:
• Perform another hook flash.
• Hang up the handset. Pick up the handset when your phone rings.
Forward Your Analog Phone Calls to Another Number
If you're going to be away from your desk, but don't want to miss an important call then forward your calls
to another phone.
Cisco ATA 191 and ATA 192 Analog Telephone Adapter User Guide for Multiplatform Firmware
26
Calls
Answer a call on your ATA phone

Cisco ATA 191 Specifications

General

Brand	Cisco
Model	ATA 191
Category	Adapter
Language	English