Cisco ATA 191 User Manual

Table 12: Event Log Settings
DescriptionField
Set the Event log server address.Address
Set the Event log server port.
Default value: 514
Port
Set the Event log flag, it’s a bitwise value. Setting list is as below:
• <Dev>:1(0x01)
• <SYS>:2(0x01<<1)
• <CFG>:4(0x01<<2)
• <REG>:8(0x01<<3)
Default value: 15 (All events)
Flag
PRT Viewer
Use the Administration > Log > PRT Viewer to generate and download Problem Report Tools (PRT) files.
To generate a problem report remotely, see Generate a Problem Report Remotely.
After making your changes, click Submit to save your settings, or click Cancel to redisplay the page with
the saved settings.
Table 13: Problem Report Tool Settings
DescriptionField
Set the PRT log upload URLPRT Upload URL
Set the PRT log upload method, POST or PUT.
Default: POST
PRT Upload Method
Set the PRT max timer, valid range is 15-1440 minutes
Disabled: 0
Default: 0
PRT Max Timer
List the PRT file which is generated by user on ATA.Problem Report Tools Logs
Click this button to generate and download the contents of the PRT as
a file on your computer. In the dialog box, you can open the file or save
it.
Generate PRT
Generate a Problem Report Remotely
You can submit a problem report remotely by using the Phone Adapter Configuration Utility.
Cisco ATA 191 and ATA 192 Analog Telephone Adapter User Guide for Multiplatform Firmware
21
Configure Features
PRT Viewer

Cisco ATA 191 Specifications

General

Brand	Cisco
Model	ATA 191
Category	Adapter
Language	English