Cisco cBR User Manual

Using the Auxiliary Port on the Supervisor PIC
The auxiliary port provides a connection for a terminal server to allow remote access to the router and its
command-line interface (CLI).
Before You Begin
•
Install the Supervisor PIC.
•
Install the Supervisor Card.
Required Tools and Equipment
•
RJ-45 cable
•
RJ-45-to-DB-9 adapter
•
Terminal server
Step 1
Connect one end of the RJ-45 cable to the auxiliary port on the Supervisor PIC.
Figure 16: Auxiliary Port Connection on the Supervisor PIC
Step 2
Connect the other end of the RJ-45 cable to the RJ-45-to-DB-9 adapter.
Figure 17: Connecting an RJ-45-to-DB-9 Adapter
Step 3
Connect the RJ-45-to-DB-9 adapter to the appropriate serial port on the terminal server.
Cisco Converged Broadband Routers Hardware Installation Guide
19
Installing the Supervisor in the Cisco cBR Chassis
Using the Auxiliary Port on the Supervisor PIC

Cisco cBR Specifications

General

Brand	Cisco
Model	cBR
Category	Network Router
Language	English