5-19
Cisco Unified IP Phone 7962G and 7942G Administration Guide for Cisco Unified Communications Manager 7.0
OL-15483-01
Chapter 5 Configuring Features, Templates, Services, and Users
Managing the User Options Web Pages
• Set up speed dial and call forwarding numbers.
• Subscribe to services that are accessible from a Cisco Unified IP Phone.
You can add users to Cisco Unified Communications Manager using either of these methods:
• To add users individually, choose User Management > End User from Cisco Unified
Communications Manager Administration.
Refer to the Cisco Unified Communications Manager Administration Guide for more information
about adding users. Refer to the Cisco Unified Communications Manager System Guide for details
about user information.
• To add users in batches, use the Bulk Administration Tool. This method also enables you to set an
identical default password for all users.
Refer to Cisco Unified Communications Manager Bulk Administration Guide for details.
Managing the User Options Web Pages
From the User Options web page, users can customize and control several phone features and settings.
For detailed information about the User Options web pages, refer to Cisco
Unified IP Phone 7962G and
7942G Phone Guide.
Giving Users Access to the User Options Web Pages
Before a user can access the User Options web pages, you must use Cisco Unified Communications
Manager Administration to add the user to a standard Cisco Unified Communications Manager end user
group: choose User Management > User Groups.
For additional information, refer to Cisco Unified Communications Manager Administration Guide,
“End User Configuration” section.
Specifying Options that Appear on the User Options Web Pages
Most options that are on the User Options web pages appear by default. However, the following options
must be set by the system administrator by using Enterprise Parameters Configuration settings in Cisco
Unified Communications Manager Administration:
• Show Ring Settings
• Show Line Text Label Settings
• Show Call Forwarding
Note The settings apply to all User Options web pages at your site.
To specify the options that appear on the User Options web pages, follow these steps:
Procedure
Step 1 From Cisco Unified Communications Manager Administration, choose System > Enterprise
Parameters.
To Next Page
Loading...
Need help?
General