Cisco CP-7942G User Manual

1-18
Cisco Unified IP Phone 7962G and 7942G Administration Guide for Cisco Unified Communications Manager 7.0
OL-15483-01
Chapter 1 An Overview of the Cisco Unified IP Phone
Overview of Configuring and Installing Cisco Unified IP Phones
Configuring Cisco Unified IP Phones in Cisco Unified Communications
Manager
To add phones to the Cisco Unified Communications Manager database, you can use:
• Auto-registration
• Cisco Unified Communications Manager Administration
• Bulk Administration Tool (BAT)
• BAT and the Tool for Auto-Registered Phones Support (TAPS)
For more information about these choices, see the “Adding Phones to the Cisco Unified Communications
Manager Database” section on page 2-8.
For general information about configuring phones in Cisco Unified Communications Manager, refer to
the “Cisco
Unified IP Phone” chapter in Cisco Unified Communications Manager System Guide.
Checklist for Configuring the Cisco Unified IP Phone 7962G and 7942G in Cisco Unified
Communications Manager
Table 1-6 provides an overview and checklist of configuration tasks for the Cisco Unified
IP Phone 7962G and 7942G in Cisco Unified Communications Manager Administration. The list
presents a suggested order to guide you through the phone configuration process. Some tasks are
optional, depending on your system and user needs. For detailed procedures and information, refer to
the sources in the list.

Cisco CP-7942G Specifications

General

Brand	Cisco
Model	CP-7942G
Category	IP Phone
Language	English