Cisco CP-7942G User Manual

4-11
Cisco Unified IP Phone 7962G and 7942G Administration Guide for Cisco Unified Communications Manager 7.0
OL-15483-01
Chapter 4 Configuring Settings on the Cisco Unified IP Phone
Device Configuration Menu
Device Configuration Menu
The Device Configuration menu provides access to eight sub-menus from which you can view a variety
of settings that are specified in the configuration file for a phone. (The phone downloads the
configuration file from the TFTP server.) These sub-menus are:
• Unified CM Configuration Menu, page 4-11
• SIP Configuration Menu (SIP Phones Only), page 4-12
• Call Preferences Menu (SIP Phones Only), page 4-14
• HTTP Configuration Menu, page 4-15
• Locale Configuration Menu, page 4-16
• UI Configuration Menu, page 4-17
• Media Configuration Menu, page 4-19
• Ethernet Configuration Menu, page 4-22
• Security Configuration Menu, page 4-22
• QoS Configuration Menu, page 4-23
• Network Configuration Menu, page 4-24
For instructions about how to access the Device Configuration menu and its sub-menus, see the
“Displaying a Configuration Menu” section on page 4-2.
Unified CM Configuration Menu
The Unified CM Configuration menu contains the options Unified CM1, Unified CM2, Unified CM3,
Unified CM4, and Unified CM5. These options show the Cisco
Unified Communications Manager
servers that are available for processing calls from the phone, in prioritized order. To change these
options, use Cisco
Unified Communications Manager Administration, Cisco Unified CM Group
Configuration.
For an available Cisco Unified Communications Manager server, an option on the Unified CM
Configuration menu will show the Cisco
Unified Communications Manager server IP address or name
and one of the states shown in
Table 4-5.
An option may also display one of more of the designations or icons shown in Table 4-6.
Ta b l e 4-5 Cisco Unified Communications Manager Server States
State Description
Active Cisco Unified Communications Manager server from which the phone is
currently receiving call-processing services
Standby Cisco Unified Communications Manager server to which the phone
switches if the current server becomes unavailable
Blank No current connection to this Cisco Unified Communications Manager
server

Cisco CP-7942G Specifications

General

Brand	Cisco
Model	CP-7942G
Category	IP Phone
Language	English