EasyManuals Logo
Home>Cisco>IP Phone>CP-7942G

Cisco CP-7942G User Manual

Cisco CP-7942G
210 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #76 background imageLoading...
Page #76 background image
4-10
Cisco Unified IP Phone 7962G and 7942G Administration Guide for Cisco Unified Communications Manager 7.0
OL-15483-01
Chapter 4 Configuring Settings on the Cisco Unified IP Phone
Network Configuration Menu
.
Related Topics
Displaying a Configuration Menu, page 4-2
Unlocking and Locking Options, page 4-3
Editing Values, page 4-3
Overview of Options Configurable from a Phone, page 4-4
Device Configuration Menu, page 4-11
TFTP Server 2 Optional backup TFTP server that the phone uses if the
primary TFTP server is unavailable.
If neither the primary TFTP server nor the backup TFTP
server is listed in the CTL file on the phone, you must
unlock the CTL file before you can save changes to the
TFTP Server 2 option. In this case, the phone will delete
the CTL file when you save changes to the TFTP Server 2
option. A new CTL file will be downloaded from the new
TFTP Server 2 address.
For information about the CTL file, refer to Cisco Unified
Communications Manager Security Guide. For
information about unlocking the CTL file, see to the
“Security Configuration Menu” section on page 4-27.
1. Unlock the CTL file, if necessary
(for example, if you are changing
the administrative domain of the
phone).
2. Unlock network configuration
options.
3. Enter an IP address for the TFTP
Server 1 option.
4. Scroll to the TFTP Server 2
option, press the Edit softkey,
and then enter a new backup
TFTP server IP address.
5. Press the Validate softkey, and
then press the Save softkey.
Note If you forgot to unlock the
CTL file, you can change the
TFTP Server 2 address in the
CTL file, then erase the CTL
file by pressing the Erase
softkey from the Security
Configuration menu. A new
CTL file will be downloaded
from the new TFTP Server 2
address.
BOOTP Server Indicates whether the phone obtains its configuration from
a Bootstrap Protocol (BootP) server instead of from a
DHCP server.
Display only—Cannot configure.
Table 4-3 IPv4 Configuration Menu Options (continued)
Option Description To Change

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Cisco CP-7942G and is the answer not in the manual?

Cisco CP-7942G Specifications

General IconGeneral
BrandCisco
ModelCP-7942G
CategoryIP Phone
LanguageEnglish

Related product manuals