Cisco CP-7942G User Manual

Contents
vi
Cisco Unified IP Phone 7962G and 7942G Administration Guide for Cisco Unified Communications Manager 7.0
OL-15483-01
CHAPTER 2 Preparing to Install the Cisco Unified IP Phone on Your Network 2-1
Understanding Interactions with Other Cisco Unified IP Telephony Products 2-1
Understanding How the Cisco Unified IP Phone Interacts with Cisco Unified Communications
Manager 2-2
Understanding How the Cisco Unified IP Phone Interacts with the VLAN 2-2
Providing Power to the Cisco Unified IP Phone 2-3
Power Guidelines 2-4
Power Outage 2-4
Obtaining Additional Information about Power 2-5
Understanding Phone Configuration Files 2-5
Understanding the Phone Startup Process 2-7
Adding Phones to the Cisco Unified Communications Manager Database 2-8
Adding Phones with Auto-Registration 2-9
Adding Phones with Auto-Registration and TAPS 2-10
Adding Phones with Cisco Unified Communications Manager Administration 2-11
Adding Phones with BAT 2-11
Using Cisco Unified IP Phones with Different Protocols 2-11
Converting a New Phone from SCCP to SIP 2-12
Converting an In-Use Phone from SCCP to SIP 2-12
Converting an In-Use Phone from SIP to SCCP 2-12
Deploying a Phone in an SCCP and SIP Environment 2-13
Determining the MAC Address for a Cisco Unified IP Phone 2-13
CHAPTER 3 Setting Up the Cisco Unified IP Phone 3-1
Before You Begin 3-1
Network Requirements 3-1
Cisco Unified Communications Manager Configuration 3-2
Understanding the Cisco Unified IP Phone 7962G and 7942G Components 3-2
Network and Access Ports 3-2
Handset 3-3
Speakerphone 3-3
Headset 3-3
Audio Quality Subjective to the User 3-4
Connecting a Headset 3-4
Disabling a Headset 3-4
Enabling a Wireless Headset 3-4
Using External Devices 3-4
Installing the Cisco Unified IP Phone 3-5

Cisco CP-7942G Specifications

General

Brand	Cisco
Model	CP-7942G
Category	IP Phone
Language	English