Cisco CRS-1 - Carrier Routing System Router Hardware Installation Guide

Contents
v
Cisco CRS-1 Carrier Routing System SIP and SPA Hardware Installation Guide
OL-17439-01
Preparing to Install a SIP or a SPA 4-1
Required Tools and Equipment 4-1
Safety Guidelines 4-1
Safety Warnings 4-1
General Guidelines 4-2
Electrical Equipment Guidelines 4-2
Preventing Electrostatic Discharge Damage 4-2
Laser and LED Safety 4-3
Installing and Removing a SIP 5-1
Handling SIPs 5-1
Guidelines for SIP Installation and Removal 5-3
SIP Installation and Removal 5-4
Removing a SIP 5-4
Installing a SIP 5-5
Installing and Removing a SPA 6-1
Handling SPAs 6-1
SPA Installation and Removal 6-2
Installing a SPA in a SIP 6-5
Removing a SPA from a SIP 6-6
Online Insertion and Removal 6-6
Optical Device Installation and Maintenance 6-6
Installing and Removing Small Form-Factor Pluggable Modules 6-6
Cleaning Optical Devices 6-7
Checking the Installation 6-7
Verifying the Installation 6-7
Using show Commands to Verify SIP and SPA Status 6-8
Using show Commands to Display SPA Information 6-8
SPA Blank Filler Plates 6-9
SPA Cable-Management Brackets 6-9
Troubleshooting the Installation 7-1
Troubleshooting the SIP 7-1
Troubleshooting the SPA 7-2
Using debug Commands 7-3
Packing a SIP for Shipment 7-4

Cisco CRS-1 - Carrier Routing System Router Specifications

General

Brand	Cisco
Model	CRS-1 - Carrier Routing System Router
Category	Network Router
Language	English